Deutsch
EnglishCentrifugal Pump made of Stainless Steel EUROLINE M6.2
Normal suction, magnetic drive, leak-free chemical centrifugal pump made of stainless steel in close coupled block design, according to CE regulations.
MARCH magnetically driven centrifugal chemical pumps operate entirely without mechanical shaft sealing. The power is transmitted to the hydraulic part by a force-locking connection using powerful permanent magnets, without physical contact. MARCH magnetically driven centrifugal chemical pumps meet maximum requirements in terms of quality, economy and reliability when pumping aggressive, toxic and environmentally hazardous liquids.
Features
- Centrifugal Pump
- Closed Impeller, capsulated
- Leak-free
- Magnetic driven
- NdFeB or CoSm permanent magnets
- Closed coupled
- Normal suction
- Maintenance free
- Only a few wear parts
- Pump execution acc. to Ex II2G cbk T3-5
TECHNICAL DATA FOR THE STANDARD VERSION
Performance data
| Flow rate: | max. 6,0 m³/h |
|---|---|
| Discharge head: | max. 8,2 mWs |
Temperatures
| AISI 316L: | max. 200°C |
|---|
Available materials
| Housing: | AISI 316L |
|---|---|
| Impeller: | CF8M |
| Pump shaft: | SiC or AISI316L |
| Sleeve bearing: | Carbon graphite or PTFEG |
| O-Ring: | EPDM, Viton, FEP |
System pressure
| AISI 316L: | norm. 10 bar |
|---|---|
| Higher pressure ratings upon request | |
Connection on suction side
| Thread G 1“ (f) |
| Flange DN 25 |
Connection on discharge side
| Thread G 3/4" (m) |
| Flange DN 20 |
Motor
| IEC AC or three-phase motor |
| 3x230/400 V, 50 Hz |
| 550 Watt, 2900 1/min |