Sie sind hier: Startseite» MARCH US Pump Assemblies» Series 320» 320-AP-MD Magnetic Drive Pump

320-AP-MD Magnetic Drive Pump

320-AP-MD Magnetic Drive Pump
Für eine größere Ansicht klicken Sie auf das Vorschaubild

 

March Pump’s industrial 320-AP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3.3 gallons per minute at 1 feet, and its maximum head is 40 Feet (17PSI).

Unit60Hz
SystemUSMetric
Max Flow3.3 GPM 12.5 LPM
Max Head40 FT12.2 M
Power0.083 HP0.062 KW
Unit50Hz
SystemUSMetric
Max Flow2.9 GPM11.3 LPM
Max Head28.8 FT8.8 M
Power0.083 HP0.062 KW
Electrical/Air: 115V 50/60Hz or 230V 50/60Hz
Inlet: 5/8"OD
Outlet: 1/2"OD
  • Wet End: Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft and Thrust Washer)
  • Motor Options: Air Cooled or Blast Cooled
  • Max Internal Pressure: 50 PSI / 3.4 bar
  • Max Liquid Temperature: 190 °F / 87 °C
  • Note: Product image may be different than actual product received.

Part Numbers

P/NPump DescriptionModified With
0320-0001-0100320-AP-MD 115VStandard
0320-0001-0600320-AP-MD 230VStandard
The below are modified 320-AP-MD's
0320-0001-0113320-AP-MD 115VEPDM O-Ring
0320-0001-0613320-AP-MD 230VEPDM O-Ring

Parts Breakdown

Parts Image
ItemPart NumberQtyDescription
0320-0001-01001320-AP-MD, 1 Phase, 115V, Complete Standard Pump
0320-0001-06001320-AP-MD, 1 Phase, 230V, Complete Standard Pump
10320-0008-10008#8-32 x 1-1/4” Long Screw (Stainless)
20320-0003-10001Cover with 5/8" OD Inlet (Polypropylene)
30320-0006-100010.118" CS x 3.622" ID "O" Ring (Viton)
40130-0028-10001Thrust Washer (Ceramic)
50130-0024-10001Shaft (Ceramic)
60320-0004-03001Impeller (Polypropylene)
70320-0002-01001Rear Housing with 1/2" OD Outlet & Ceramic Thrust Washer (Polypropylene)
80130-0043-02001Drive Magnet
90618-0027-10004#8-32 x 5/8" Long Screw (Stainless)
100135-0016-10004#8 Washer (Stainless)
110320-0007-01001Motor Bracket (Plastic)
120145-0012-10001Motor, 1 Phase, 115V, 50/60 Hz
130145-0036-10001Motor, 1 Phase, 230V, 50/60 Hz

Options

Options Image
ItemPart NumberQtyDescription
30320-0012-100010.118" CS x 3.622" ID "O" Ring (EPDM)
0750-1011-10001Stainless Steel Tag w/Customer's Desired Information (Not Shown)

Motor Information

0145-0012-1000 Motor
3 Foot Cord
60Hz: 1Ph 115V 0.083HP/ 0.062kW, 1.75 AMPS, 3450 RPM
50Hz: 1Ph 115V 0.083HP/ 0.062kW, 1.75 AMPS, 2850 RPM

0145-0036-1000 Motor
3 Foot Cord
60Hz: 1Ph 230V 0.083HP/ 0.062kW, 0.75 AMPS, 3450 RPM
50Hz: 1Ph 230V 0.083HP/ 0.062kW, 0.75 AMPS, 2850 RPM

Please contact us for alternative motor data

Perfect for Applications Including

The 320-AP-MD has the durability for continuous duty in applications requiring low flow and high head. Typical applications include laser cooling, medical systems, filter systems, and various processing equipment in the electronics industry.

Great for Chemicals Including

The 320-AP-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The 320-AP-MD may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the 320-AP-MD. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial 320-AP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3.3 gallons per minute at 1 feet, and its maximum head is 40 Feet (17PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 5/8 inch smooth, and the outlet is 1/2 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.083 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 320-AP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March 320-AP-MD is suitable for your application, please contact March Pump.


 


MARCH Pumpen GmbH & Co. KG
Rathenaustrasse 2, 35394 Gießen

 +49 (0) 641 / 68 68 06 – 0
 +49 (0) 641 / 68 68 06 – 60
 info(at)march-pumpen.com