You are here: Main page» MARCH US Pump Assemblies» Air Motor Pumps» TE-8S-MD-AM

TE-8S-MD-AM

TE-8S-MD-AM
For a larger view click on the thumbnail

 

 
SystemUSMetric
Max Flow97 GPM367 LPM
Max Head63 FT19.2 M
Power5 HP3.72 KW
 
 
Electrical/Air: 65PSI and 125CFM
Inlet: 2"MPT
Outlet: 1-1/2"MPT
  • Wet End: 316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers) Carbon (Bushing)
  • Max Internal Pressure: 200 PSI / 13.7 bar
  • Max Liquid Temperature:: 250 °F / 121 °C
  • Note: Product image may be different than actual product received.

Part Numbers

 
P/NPump DescriptionModified With
0157-0158-0100TE-8S-MD-AMStandard
 The below are modified TE-8S-MD-AM's 

Options

 
ItemPart NumberQtyDescription
40157-0032-100011/8” CS x 7-1/2” ID “O” Ring (Teflon Encapsulated Viton)
40157-0058-100010.157” CS x 7.244” ID “O” Ring (EPDM)
50157-0043-10001Front Thrust Washer (Hastelloy C)
60157-0045-10001Shaft (Hastelloy C)
60157-0099-10001Shaft, 3 Flats (Ceramic)
60157-0150-10001Shaft (316 Stainless)
70157-0029-02001Impeller with Ryton Bushing (316 Stainless)
70157-0029-07001Impeller with Mica Teflon Bushing (316 Stainless)
80157-0047-10001Rear Thrust Washer (Hastelloy C)
 0750-1011-10001Stainless Steel Tag w/Customer's Desired Information (Not Shown)

Motor Information

0157-0152-1000 Motor
5HP/3.72kW, 65 PSI and 125 CFM, 1/2″BSP Air Connection

Please contact us for alternative motor data

Perfect for Applications Including

Applications for the TE-8S-MD-AM Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.

Great for Chemicals Including

The TE-8S-MD-AM has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, and Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals. The TE-8S-MD-AM may have been modified to handle these chemicals. This pump may have to be modified to pump specific gravities, viscosities, or elevated temperatures different then ambient water. Please contact March Pump to review your application before using the TE-8S-MD-AM. Chemical Resistance Chart

Summary Paragraph

March Pump’s industrial TE-8S-MD-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 97 gallons per minute at 8 feet, and its maximum head is 63 Feet (27PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 2 inch male pipe thread, and the outlet is 1-1/2 inch male pipe thread. The standard motor is a Compressed Air Motor which may require 65 PSI and 125 CFM. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-8S-MD-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-8S-MD-AM is suitable for your application, please contact March Pump.

 


MARCH Pumpen GmbH & Co. KG
Rathenaustrasse 2, 35394 Gießen

 +49 (0) 641 / 68 68 06 – 0
 +49 (0) 641 / 68 68 06 – 60
 info(at)march-pumpen.com